webgl/1.0.4/conformance/textures/misc/exif-orientation.html fails
*** Bug 223342 has been marked as a duplicate of this bug. ***
https://www.khronos.org/registry/webgl/sdk/tests/conformance/textures/misc/exif-orientation.html?webglVersion=1&quiet=0&quick=1 Verifies EXIF orientation is respected when uploading images to WebGL textures On success, you will see a series of "PASS" messages, followed by "TEST COMPLETE". ---------------------------------------------------------------- Testing exif-orientation-test-1-normal.jpg via ImageBitmap from Blob (createImageBitmap options not supported - skipping flipY=true case) Testing texImage2D, flipY = false Checking top PASS shouldBe 255,0,0 +/-5 Checking left PASS shouldBe 0,0,255 +/-5 Checking right PASS shouldBe 255,255,0 +/-5 Checking bottom PASS shouldBe 0,255,0 +/-5 Testing texSubImage2D, flipY = false Checking top PASS shouldBe 255,0,0 +/-5 Checking left PASS shouldBe 0,0,255 +/-5 Checking right PASS shouldBe 255,255,0 +/-5 Checking bottom PASS shouldBe 0,255,0 +/-5 ---------------------------------------------------------------- Testing exif-orientation-test-1-normal.jpg via HTMLImageElement Testing texImage2D, flipY = true Checking top PASS shouldBe 255,0,0 +/-5 Checking left PASS shouldBe 0,0,255 +/-5 Checking right PASS shouldBe 255,255,0 +/-5 Checking bottom PASS shouldBe 0,255,0 +/-5 Testing texSubImage2D, flipY = true Checking top PASS shouldBe 255,0,0 +/-5 Checking left PASS shouldBe 0,0,255 +/-5 Checking right PASS shouldBe 255,255,0 +/-5 Checking bottom PASS shouldBe 0,255,0 +/-5 Testing texImage2D, flipY = false Checking top PASS shouldBe 255,0,0 +/-5 Checking left PASS shouldBe 0,0,255 +/-5 Checking right PASS shouldBe 255,255,0 +/-5 Checking bottom PASS shouldBe 0,255,0 +/-5 Testing texSubImage2D, flipY = false Checking top PASS shouldBe 255,0,0 +/-5 Checking left PASS shouldBe 0,0,255 +/-5 Checking right PASS shouldBe 255,255,0 +/-5 Checking bottom PASS shouldBe 0,255,0 +/-5 ---------------------------------------------------------------- Testing exif-orientation-test-2-mirror-horizontal.jpg via ImageBitmap from Blob (createImageBitmap options not supported - skipping flipY=true case) Testing texImage2D, flipY = false Checking top PASS shouldBe 255,0,0 +/-5 Checking left FAIL shouldBe 0,0,255 +/-5 at (102, 128) expected: 0,0,255 was 255,255,1 Checking right FAIL shouldBe 255,255,0 +/-5 at (153, 128) expected: 255,255,0 was 0,0,254 Checking bottom PASS shouldBe 0,255,0 +/-5 Testing texSubImage2D, flipY = false Checking top PASS shouldBe 255,0,0 +/-5 Checking left FAIL shouldBe 0,0,255 +/-5 at (102, 128) expected: 0,0,255 was 255,255,1 Checking right FAIL shouldBe 255,255,0 +/-5 at (153, 128) expected: 255,255,0 was 0,0,254 Checking bottom PASS shouldBe 0,255,0 +/-5 ---------------------------------------------------------------- Testing exif-orientation-test-2-mirror-horizontal.jpg via HTMLImageElement Testing texImage2D, flipY = true Checking top PASS shouldBe 255,0,0 +/-5 Checking left PASS shouldBe 0,0,255 +/-5 Checking right PASS shouldBe 255,255,0 +/-5 Checking bottom PASS shouldBe 0,255,0 +/-5 Testing texSubImage2D, flipY = true Checking top PASS shouldBe 255,0,0 +/-5 Checking left PASS shouldBe 0,0,255 +/-5 Checking right PASS shouldBe 255,255,0 +/-5 Checking bottom PASS shouldBe 0,255,0 +/-5 Testing texImage2D, flipY = false Checking top PASS shouldBe 255,0,0 +/-5 Checking left PASS shouldBe 0,0,255 +/-5 Checking right PASS shouldBe 255,255,0 +/-5 Checking bottom PASS shouldBe 0,255,0 +/-5 Testing texSubImage2D, flipY = false Checking top PASS shouldBe 255,0,0 +/-5 Checking left PASS shouldBe 0,0,255 +/-5 Checking right PASS shouldBe 255,255,0 +/-5 Checking bottom PASS shouldBe 0,255,0 +/-5 ---------------------------------------------------------------- Testing exif-orientation-test-3-rotate-180.jpg via ImageBitmap from Blob (createImageBitmap options not supported - skipping flipY=true case) Testing texImage2D, flipY = false Checking top FAIL shouldBe 255,0,0 +/-5 at (128, 64) expected: 255,0,0 was 0,255,1 Checking left FAIL shouldBe 0,0,255 +/-5 at (102, 128) expected: 0,0,255 was 255,255,1 Checking right FAIL shouldBe 255,255,0 +/-5 at (153, 128) expected: 255,255,0 was 0,0,254 Checking bottom FAIL shouldBe 0,255,0 +/-5 at (128, 192) expected: 0,255,0 was 254,0,0 Testing texSubImage2D, flipY = false Checking top FAIL shouldBe 255,0,0 +/-5 at (128, 64) expected: 255,0,0 was 0,255,1 Checking left FAIL shouldBe 0,0,255 +/-5 at (102, 128) expected: 0,0,255 was 255,255,1 Checking right FAIL shouldBe 255,255,0 +/-5 at (153, 128) expected: 255,255,0 was 0,0,254 Checking bottom FAIL shouldBe 0,255,0 +/-5 at (128, 192) expected: 0,255,0 was 254,0,0 ---------------------------------------------------------------- Testing exif-orientation-test-3-rotate-180.jpg via HTMLImageElement Testing texImage2D, flipY = true Checking top PASS shouldBe 255,0,0 +/-5 Checking left PASS shouldBe 0,0,255 +/-5 Checking right PASS shouldBe 255,255,0 +/-5 Checking bottom PASS shouldBe 0,255,0 +/-5 Testing texSubImage2D, flipY = true Checking top PASS shouldBe 255,0,0 +/-5 Checking left PASS shouldBe 0,0,255 +/-5 Checking right PASS shouldBe 255,255,0 +/-5 Checking bottom PASS shouldBe 0,255,0 +/-5 Testing texImage2D, flipY = false Checking top PASS shouldBe 255,0,0 +/-5 Checking left PASS shouldBe 0,0,255 +/-5 Checking right PASS shouldBe 255,255,0 +/-5 Checking bottom PASS shouldBe 0,255,0 +/-5 Testing texSubImage2D, flipY = false Checking top PASS shouldBe 255,0,0 +/-5 Checking left PASS shouldBe 0,0,255 +/-5 Checking right PASS shouldBe 255,255,0 +/-5 Checking bottom PASS shouldBe 0,255,0 +/-5 ---------------------------------------------------------------- Testing exif-orientation-test-4-mirror-vertical.jpg via ImageBitmap from Blob (createImageBitmap options not supported - skipping flipY=true case) Testing texImage2D, flipY = false Checking top FAIL shouldBe 255,0,0 +/-5 at (128, 64) expected: 255,0,0 was 0,255,1 Checking left PASS shouldBe 0,0,255 +/-5 Checking right PASS shouldBe 255,255,0 +/-5 Checking bottom FAIL shouldBe 0,255,0 +/-5 at (128, 192) expected: 0,255,0 was 254,0,0 Testing texSubImage2D, flipY = false Checking top FAIL shouldBe 255,0,0 +/-5 at (128, 64) expected: 255,0,0 was 0,255,1 Checking left PASS shouldBe 0,0,255 +/-5 Checking right PASS shouldBe 255,255,0 +/-5 Checking bottom FAIL shouldBe 0,255,0 +/-5 at (128, 192) expected: 0,255,0 was 254,0,0 ---------------------------------------------------------------- Testing exif-orientation-test-4-mirror-vertical.jpg via HTMLImageElement Testing texImage2D, flipY = true Checking top PASS shouldBe 255,0,0 +/-5 Checking left PASS shouldBe 0,0,255 +/-5 Checking right PASS shouldBe 255,255,0 +/-5 Checking bottom PASS shouldBe 0,255,0 +/-5 Testing texSubImage2D, flipY = true Checking top PASS shouldBe 255,0,0 +/-5 Checking left PASS shouldBe 0,0,255 +/-5 Checking right PASS shouldBe 255,255,0 +/-5 Checking bottom PASS shouldBe 0,255,0 +/-5 Testing texImage2D, flipY = false Checking top PASS shouldBe 255,0,0 +/-5 Checking left PASS shouldBe 0,0,255 +/-5 Checking right PASS shouldBe 255,255,0 +/-5 Checking bottom PASS shouldBe 0,255,0 +/-5 Testing texSubImage2D, flipY = false Checking top PASS shouldBe 255,0,0 +/-5 Checking left PASS shouldBe 0,0,255 +/-5 Checking right PASS shouldBe 255,255,0 +/-5 Checking bottom PASS shouldBe 0,255,0 +/-5 ---------------------------------------------------------------- Testing exif-orientation-test-5-mirror-horizontal-90-ccw.jpg via ImageBitmap from Blob (createImageBitmap options not supported - skipping flipY=true case) Testing texImage2D, flipY = false Checking top FAIL shouldBe 255,0,0 +/-5 at (128, 64) expected: 255,0,0 was 0,0,254 Checking left FAIL shouldBe 0,0,255 +/-5 at (102, 128) expected: 0,0,255 was 255,255,1 Checking right PASS shouldBe 255,255,0 +/-5 Checking bottom FAIL shouldBe 0,255,0 +/-5 at (128, 192) expected: 0,255,0 was 255,255,0 Testing texSubImage2D, flipY = false Checking top FAIL shouldBe 255,0,0 +/-5 at (128, 64) expected: 255,0,0 was 0,0,254 Checking left FAIL shouldBe 0,0,255 +/-5 at (102, 128) expected: 0,0,255 was 255,255,1 Checking right PASS shouldBe 255,255,0 +/-5 Checking bottom FAIL shouldBe 0,255,0 +/-5 at (128, 192) expected: 0,255,0 was 255,255,0 ---------------------------------------------------------------- Testing exif-orientation-test-5-mirror-horizontal-90-ccw.jpg via HTMLImageElement Testing texImage2D, flipY = true Checking top PASS shouldBe 255,0,0 +/-5 Checking left PASS shouldBe 0,0,255 +/-5 Checking right PASS shouldBe 255,255,0 +/-5 Checking bottom PASS shouldBe 0,255,0 +/-5 Testing texSubImage2D, flipY = true Checking top PASS shouldBe 255,0,0 +/-5 Checking left PASS shouldBe 0,0,255 +/-5 Checking right PASS shouldBe 255,255,0 +/-5 Checking bottom PASS shouldBe 0,255,0 +/-5 Testing texImage2D, flipY = false Checking top PASS shouldBe 255,0,0 +/-5 Checking left PASS shouldBe 0,0,255 +/-5 Checking right PASS shouldBe 255,255,0 +/-5 Checking bottom PASS shouldBe 0,255,0 +/-5 Testing texSubImage2D, flipY = false Checking top PASS shouldBe 255,0,0 +/-5 Checking left PASS shouldBe 0,0,255 +/-5 Checking right PASS shouldBe 255,255,0 +/-5 Checking bottom PASS shouldBe 0,255,0 +/-5 ---------------------------------------------------------------- Testing exif-orientation-test-6-90-ccw.jpg via ImageBitmap from Blob (createImageBitmap options not supported - skipping flipY=true case) Testing texImage2D, flipY = false Checking top FAIL shouldBe 255,0,0 +/-5 at (128, 64) expected: 255,0,0 was 255,255,1 Checking left PASS shouldBe 0,0,255 +/-5 Checking right FAIL shouldBe 255,255,0 +/-5 at (153, 128) expected: 255,255,0 was 0,0,254 Checking bottom FAIL shouldBe 0,255,0 +/-5 at (128, 192) expected: 0,255,0 was 0,0,254 Testing texSubImage2D, flipY = false Checking top FAIL shouldBe 255,0,0 +/-5 at (128, 64) expected: 255,0,0 was 255,255,1 Checking left PASS shouldBe 0,0,255 +/-5 Checking right FAIL shouldBe 255,255,0 +/-5 at (153, 128) expected: 255,255,0 was 0,0,254 Checking bottom FAIL shouldBe 0,255,0 +/-5 at (128, 192) expected: 0,255,0 was 0,0,254 ---------------------------------------------------------------- Testing exif-orientation-test-6-90-ccw.jpg via HTMLImageElement Testing texImage2D, flipY = true Checking top PASS shouldBe 255,0,0 +/-5 Checking left PASS shouldBe 0,0,255 +/-5 Checking right PASS shouldBe 255,255,0 +/-5 Checking bottom PASS shouldBe 0,255,0 +/-5 Testing texSubImage2D, flipY = true Checking top PASS shouldBe 255,0,0 +/-5 Checking left PASS shouldBe 0,0,255 +/-5 Checking right PASS shouldBe 255,255,0 +/-5 Checking bottom PASS shouldBe 0,255,0 +/-5 Testing texImage2D, flipY = false Checking top PASS shouldBe 255,0,0 +/-5 Checking left PASS shouldBe 0,0,255 +/-5 Checking right PASS shouldBe 255,255,0 +/-5 Checking bottom PASS shouldBe 0,255,0 +/-5 Testing texSubImage2D, flipY = false Checking top PASS shouldBe 255,0,0 +/-5 Checking left PASS shouldBe 0,0,255 +/-5 Checking right PASS shouldBe 255,255,0 +/-5 Checking bottom PASS shouldBe 0,255,0 +/-5 ---------------------------------------------------------------- Testing exif-orientation-test-7-mirror-horizontal-90-cw.jpg via ImageBitmap from Blob (createImageBitmap options not supported - skipping flipY=true case) Testing texImage2D, flipY = false Checking top FAIL shouldBe 255,0,0 +/-5 at (128, 64) expected: 255,0,0 was 255,255,1 Checking left PASS shouldBe 0,0,255 +/-5 Checking right FAIL shouldBe 255,255,0 +/-5 at (153, 128) expected: 255,255,0 was 0,0,254 Checking bottom FAIL shouldBe 0,255,0 +/-5 at (128, 192) expected: 0,255,0 was 0,0,254 Testing texSubImage2D, flipY = false Checking top FAIL shouldBe 255,0,0 +/-5 at (128, 64) expected: 255,0,0 was 255,255,1 Checking left PASS shouldBe 0,0,255 +/-5 Checking right FAIL shouldBe 255,255,0 +/-5 at (153, 128) expected: 255,255,0 was 0,0,254 Checking bottom FAIL shouldBe 0,255,0 +/-5 at (128, 192) expected: 0,255,0 was 0,0,254 ---------------------------------------------------------------- Testing exif-orientation-test-7-mirror-horizontal-90-cw.jpg via HTMLImageElement Testing texImage2D, flipY = true Checking top PASS shouldBe 255,0,0 +/-5 Checking left PASS shouldBe 0,0,255 +/-5 Checking right PASS shouldBe 255,255,0 +/-5 Checking bottom PASS shouldBe 0,255,0 +/-5 Testing texSubImage2D, flipY = true Checking top PASS shouldBe 255,0,0 +/-5 Checking left PASS shouldBe 0,0,255 +/-5 Checking right PASS shouldBe 255,255,0 +/-5 Checking bottom PASS shouldBe 0,255,0 +/-5 Testing texImage2D, flipY = false Checking top PASS shouldBe 255,0,0 +/-5 Checking left PASS shouldBe 0,0,255 +/-5 Checking right PASS shouldBe 255,255,0 +/-5 Checking bottom PASS shouldBe 0,255,0 +/-5 Testing texSubImage2D, flipY = false Checking top PASS shouldBe 255,0,0 +/-5 Checking left PASS shouldBe 0,0,255 +/-5 Checking right PASS shouldBe 255,255,0 +/-5 Checking bottom PASS shouldBe 0,255,0 +/-5 ---------------------------------------------------------------- Testing exif-orientation-test-8-90-cw.jpg via ImageBitmap from Blob (createImageBitmap options not supported - skipping flipY=true case) Testing texImage2D, flipY = false Checking top FAIL shouldBe 255,0,0 +/-5 at (128, 64) expected: 255,0,0 was 0,0,254 Checking left FAIL shouldBe 0,0,255 +/-5 at (102, 128) expected: 0,0,255 was 255,255,1 Checking right PASS shouldBe 255,255,0 +/-5 Checking bottom FAIL shouldBe 0,255,0 +/-5 at (128, 192) expected: 0,255,0 was 255,255,0 Testing texSubImage2D, flipY = false Checking top FAIL shouldBe 255,0,0 +/-5 at (128, 64) expected: 255,0,0 was 0,0,254 Checking left FAIL shouldBe 0,0,255 +/-5 at (102, 128) expected: 0,0,255 was 255,255,1 Checking right PASS shouldBe 255,255,0 +/-5 Checking bottom FAIL shouldBe 0,255,0 +/-5 at (128, 192) expected: 0,255,0 was 255,255,0 ---------------------------------------------------------------- Testing exif-orientation-test-8-90-cw.jpg via HTMLImageElement Testing texImage2D, flipY = true Checking top PASS shouldBe 255,0,0 +/-5 Checking left PASS shouldBe 0,0,255 +/-5 Checking right PASS shouldBe 255,255,0 +/-5 Checking bottom PASS shouldBe 0,255,0 +/-5 Testing texSubImage2D, flipY = true Checking top PASS shouldBe 255,0,0 +/-5 Checking left PASS shouldBe 0,0,255 +/-5 Checking right PASS shouldBe 255,255,0 +/-5 Checking bottom PASS shouldBe 0,255,0 +/-5 Testing texImage2D, flipY = false Checking top PASS shouldBe 255,0,0 +/-5 Checking left PASS shouldBe 0,0,255 +/-5 Checking right PASS shouldBe 255,255,0 +/-5 Checking bottom PASS shouldBe 0,255,0 +/-5 Testing texSubImage2D, flipY = false Checking top PASS shouldBe 255,0,0 +/-5 Checking left PASS shouldBe 0,0,255 +/-5 Checking right PASS shouldBe 255,255,0 +/-5 Checking bottom PASS shouldBe 0,255,0 +/-5 PASS successfullyParsed is true TEST COMPLETE
At least macOS 11.3, iMacPro1,1, Radeon Pro Vega 56
<rdar://problem/75772814>
*** Bug 228948 has been marked as a duplicate of this bug. ***
https://github.com/WebKit/WebKit/pull/1897
*** Bug 242137 has been marked as a duplicate of this bug. ***