The tests were updated in that revision and fail since then: imported/w3c/web-platform-tests/html/semantics/forms/textfieldselection/selection-not-application.html [ Failure ] with diff https://build.webkit.org/results/GTK%20Linux%2064-bit%20Release%20(Tests)/r230797%20(6339)/imported/w3c/web-platform-tests/html/semantics/forms/textfieldselection/selection-not-application-pretty-diff.html and imported/w3c/web-platform-tests/streams/readable-byte-streams/general.html [ Failure ] with diff https://build.webkit.org/results/GTK%20Linux%2064-bit%20Release%20(Tests)/r230797%20(6339)/imported/w3c/web-platform-tests/streams/readable-byte-streams/general-pretty-diff.html
(In reply to Miguel Gomez from comment #0) > The tests were updated in that revision and fail since then: > > imported/w3c/web-platform-tests/html/semantics/forms/textfieldselection/ > selection-not-application.html [ Failure ] > with diff > https://build.webkit.org/results/GTK%20Linux%2064-bit%20Release%20(Tests)/ > r230797%20(6339)/imported/w3c/web-platform-tests/html/semantics/forms/ > textfieldselection/selection-not-application-pretty-diff.html > This is a similar test bug to the one that I fixed in https://github.com/w3c/web-platform-tests/pull/8567. > and > > imported/w3c/web-platform-tests/streams/readable-byte-streams/general.html [ > Failure ] > with diff > https://build.webkit.org/results/GTK%20Linux%2064-bit%20Release%20(Tests)/ > r230797%20(6339)/imported/w3c/web-platform-tests/streams/readable-byte- > streams/general-pretty-diff.html --- /home/slave/webkitgtk/gtk-linux-64-release-tests/build/layout-test-results/imported/w3c/web-platform-tests/streams/readable-byte-streams/general-expected.txt +++ /home/slave/webkitgtk/gtk-linux-64-release-tests/build/layout-test-results/imported/w3c/web-platform-tests/streams/readable-byte-streams/general-actual.txt @@ -1,3 +1,5 @@ + +Harness Error (TIMEOUT), message = null PASS getReader({mode: "byob"}) throws on non-bytes streams PASS ReadableStream with byte source can be constructed with no errors @@ -16,57 +18,64 @@ PASS ReadableStream with byte source: releaseLock() on ReadableStreamReader with pending read() must throw PASS ReadableStream with byte source: Automatic pull() after start() PASS ReadableStream with byte source: Automatic pull() after start() and read() -PASS ReadableStream with byte source: autoAllocateChunkSize +FAIL ReadableStream with byte source: autoAllocateChunkSize assert_equals: pull() must have been invoked twice expected 2 but got 1 PASS ReadableStream with byte source: Mix of auto allocate and BYOB PASS ReadableStream with byte source: Automatic pull() after start() and read(view) PASS ReadableStream with byte source: enqueue(), getReader(), then read() PASS ReadableStream with byte source: Push source that doesn't understand pull signal -PASS ReadableStream with byte source: read(), but pull() function is not callable -PASS ReadableStream with byte source: read(view), but pull() function is not callable +FAIL ReadableStream with byte source: pull() function is not callable assert_throws: constructor should throw function "() => new ReadableStream({ + pull: 'foo', + type: 'bytes' + })" did not throw PASS ReadableStream with byte source: enqueue() with Uint16Array, getReader(), then read() PASS ReadableStream with byte source: enqueue(), read(view) partially, then read() PASS ReadableStream with byte source: getReader(), enqueue(), close(), then read() PASS ReadableStream with byte source: enqueue(), close(), getReader(), then read() PASS ReadableStream with byte source: Respond to pull() by enqueue() PASS ReadableStream with byte source: Respond to pull() by enqueue() asynchronously -PASS ReadableStream with byte source: read(view), then respond() -PASS ReadableStream with byte source: read(view), then respond() with a transferred ArrayBuffer -PASS ReadableStream with byte source: read(view), then respond() with too big value -PASS ReadableStream with byte source: respond(3) to read(view) with 2 element Uint16Array enqueues the 1 byte remainder -PASS ReadableStream with byte source: enqueue(), getReader(), then read(view) -PASS ReadableStream with byte source: enqueue(), getReader(), then cancel() (mode = not BYOB) -PASS ReadableStream with byte source: enqueue(), getReader(), then cancel() (mode = BYOB) -PASS ReadableStream with byte source: getReader(), read(view), then cancel() -PASS ReadableStream with byte source: cancel() with partially filled pending pull() request -PASS ReadableStream with byte source: enqueue(), getReader(), then read(view) where view.buffer is not fully covered by view -PASS ReadableStream with byte source: Multiple enqueue(), getReader(), then read(view) -PASS ReadableStream with byte source: enqueue(), getReader(), then read(view) with a bigger view -PASS ReadableStream with byte source: enqueue(), getReader(), then read(view) with a smaller views -PASS ReadableStream with byte source: enqueue() 1 byte, getReader(), then read(view) with Uint16Array -PASS ReadableStream with byte source: enqueue() 3 byte, getReader(), then read(view) with 2-element Uint16Array -PASS ReadableStream with byte source: read(view) with Uint16Array on close()-d stream with 1 byte enqueue()-d must fail -PASS ReadableStream with byte source: A stream must be errored if close()-d before fulfilling read(view) with Uint16Array +TIMEOUT ReadableStream with byte source: Respond to multiple pull() by separate enqueue() Test timed out +NOTRUN ReadableStream with byte source: read(view), then respond() +NOTRUN ReadableStream with byte source: read(view), then respond() with a transferred ArrayBuffer +NOTRUN ReadableStream with byte source: read(view), then respond() with too big value +NOTRUN ReadableStream with byte source: respond(3) to read(view) with 2 element Uint16Array enqueues the 1 byte remainder +NOTRUN ReadableStream with byte source: enqueue(), getReader(), then read(view) +NOTRUN ReadableStream with byte source: enqueue(), getReader(), then cancel() (mode = not BYOB) +NOTRUN ReadableStream with byte source: enqueue(), getReader(), then cancel() (mode = BYOB) +NOTRUN ReadableStream with byte source: getReader(), read(view), then cancel() +NOTRUN ReadableStream with byte source: cancel() with partially filled pending pull() request +NOTRUN ReadableStream with byte source: enqueue(), getReader(), then read(view) where view.buffer is not fully covered by view +NOTRUN ReadableStream with byte source: Multiple enqueue(), getReader(), then read(view) +NOTRUN ReadableStream with byte source: enqueue(), getReader(), then read(view) with a bigger view +NOTRUN ReadableStream with byte source: enqueue(), getReader(), then read(view) with a smaller views +NOTRUN ReadableStream with byte source: enqueue() 1 byte, getReader(), then read(view) with Uint16Array +NOTRUN ReadableStream with byte source: enqueue() 3 byte, getReader(), then read(view) with 2-element Uint16Array +NOTRUN ReadableStream with byte source: read(view) with Uint16Array on close()-d stream with 1 byte enqueue()-d must fail +NOTRUN ReadableStream with byte source: A stream must be errored if close()-d before fulfilling read(view) with Uint16Array PASS ReadableStream with byte source: Throw if close()-ed more than once PASS ReadableStream with byte source: Throw on enqueue() after close() -PASS ReadableStream with byte source: read(view), then respond() and close() in pull() -PASS ReadableStream with byte source: read(view) with Uint32Array, then fill it by multiple respond() calls -PASS ReadableStream with byte source: read() twice, then enqueue() twice -PASS ReadableStream with byte source: Multiple read(view), close() and respond() -PASS ReadableStream with byte source: Multiple read(view), big enqueue() -PASS ReadableStream with byte source: Multiple read(view) and multiple enqueue() -PASS ReadableStream with byte source: read(view) with passing undefined as view must fail -PASS ReadableStream with byte source: read(view) with zero-length view must fail -PASS ReadableStream with byte source: read(view) with passing an empty object as view must fail -PASS ReadableStream with byte source: Even read(view) with passing ArrayBufferView like object as view must fail -PASS ReadableStream with byte source: read() on an errored stream -PASS ReadableStream with byte source: read(), then error() -PASS ReadableStream with byte source: read(view) on an errored stream -PASS ReadableStream with byte source: read(view), then error() -PASS ReadableStream with byte source: Throwing in pull function must error the stream -PASS ReadableStream with byte source: Throwing in pull in response to read() must be ignored if the stream is errored in it -PASS ReadableStream with byte source: Throwing in pull in response to read(view) function must error the stream -PASS ReadableStream with byte source: Throwing in pull in response to read(view) must be ignored if the stream is errored in it -PASS ReadableStream with byte source: default reader + autoAllocateChunkSize + byobRequest interaction +NOTRUN ReadableStream with byte source: read(view), then respond() and close() in pull() +NOTRUN ReadableStream with byte source: read(view) with Uint32Array, then fill it by multiple respond() calls +NOTRUN ReadableStream with byte source: read() twice, then enqueue() twice +NOTRUN ReadableStream with byte source: Multiple read(view), close() and respond() +NOTRUN ReadableStream with byte source: Multiple read(view), big enqueue() +NOTRUN ReadableStream with byte source: Multiple read(view) and multiple enqueue() +NOTRUN ReadableStream with byte source: read(view) with passing undefined as view must fail +NOTRUN ReadableStream with byte source: read(view) with zero-length view must fail +NOTRUN ReadableStream with byte source: read(view) with passing an empty object as view must fail +NOTRUN ReadableStream with byte source: Even read(view) with passing ArrayBufferView like object as view must fail +NOTRUN ReadableStream with byte source: read() on an errored stream +NOTRUN ReadableStream with byte source: read(), then error() +NOTRUN ReadableStream with byte source: read(view) on an errored stream +NOTRUN ReadableStream with byte source: read(view), then error() +NOTRUN ReadableStream with byte source: Throwing in pull function must error the stream +NOTRUN ReadableStream with byte source: Throwing in pull in response to read() must be ignored if the stream is errored in it +NOTRUN ReadableStream with byte source: Throwing in pull in response to read(view) function must error the stream +NOTRUN ReadableStream with byte source: Throwing in pull in response to read(view) must be ignored if the stream is errored in it +NOTRUN calling respond() twice on the same byobRequest should throw +NOTRUN calling respondWithNewView() twice on the same byobRequest should throw +NOTRUN calling respond(0) twice on the same byobRequest should throw even when closed +NOTRUN pull() resolving should not make releaseLock() possible +NOTRUN ReadableStream with byte source: default reader + autoAllocateChunkSize + byobRequest interaction PASS ReadableStreamBYOBReader can be constructed directly PASS ReadableStreamBYOBReader constructor requires a ReadableStream argument PASS ReadableStreamBYOBReader constructor requires an unlocked ReadableStream
The test(s) file under this bug is no longer failing. The test(s) was removed from TestExpectation in https://commits.webkit.org/258351@main.